News

30 May 2025

All Esautomotion CNCs and products, combined with the Esa4to5 Suite, are officially compliant with Industry 5.0 requirements.

First among all in its sector, Esautomotion has decided to obtain the certifications necessary to issue the DSNH declaration. In order to offer a higher profile service and an important competitive advantage to OEM customers.

6 May 2025

Esautomotion’s 2024 Balance Sheet closes in the black despite the difficult scenario. Positive prospects for 2025.

The Ordinary Shareholders’ Meeting approved on 18 April 2025 the 2024 Financial Statements of Esautomotion S.p.a., which closed with a financial year profit of Euro 1,209,893 entirely allocated to the Extraordinary Reserve.

22 April 2025

Esautomotion at Lamiera 2025. An optimistic outlook despite the uncertain scenario.

Esautomotion will participate with its own official stand at Lamiera 2025, the international event dedicated to the sheet metal working and innovative technologies related to the sector, which will be held from 6 to 9 May 2025 at Fieramilano Rho.

1 April 2025

Work has begun in the new Sangalli Servomotori plant.

The construction site of the future Sangalli Servomotori production site in Villasanta (MB) has been operational since mid-March. The plan is to complete the work by June 2025, so as to transfer all the activities present in the current Monza complex in September.

3 February 2025

Esautomotion is ready for the challenges of 2025.

With just a few weeks to go until the end of 2024, it is already time for the first balance sheets at Esautomotion.
“2024 was undeniably a difficult year, with a scenario that has discounted the long wave of customer destocking that began in 2023, after the boom of previous years caused by the shortage of electronic components”

20 November 2024

A new CRM and investments in cybersecurity to optimize Esautomotion’s Customer Experience.

Nowadays, in order to retain its customers a company must offer quick and effective responses to their requests, promptly offering customized solutions based on their changing needs.It’ a fact that various specialized studies confirm that the quality of service has […]

6 November 2024

Esautomotion and Sangalli together at the SPS 2024 in Nuremberg.

The SPS (Smart Production Solutions) trade fair in Nuremberg is by far the most important in the world for the industrial automation sector. In 2023 it officially registered more than 50,000 visitors and over 1,200 exhibitors, numbers that are expected […]

24 October 2024

New plant for Sangalli Servomotori.

Esautomotion has finally taken possession of the industrial area that will become the new production site of Sangalli Servomotori. The transfer of activities from the historic Monza plant is expected by September 2025. More space, more technology, more efficiency, more […]

10 October 2024

Esautomotion at EuroBLECH 2024. A presence that looks to Industry 5.0.

Esautomotion will have an official stand at EuroBLECH 2024, the leading trade fair for the sheet metal working industry worldwide, which will be held from 22 to 25 October in Hanover. In the nine halls of the fair, which this […]

8 October 2024

Esautomotion launches ViS-890W, the new top-of-the-range CNC.

The portfolio of the ViS-800 series has been furtherly enriched with the introduction of the new ViS-890W CNC where the W stands for Windows, being equipped with a PC. A 32” megascreen to simplify the work of machine operators. The […]

3 October 2024

Esautomotion North America at Fabtech 2024 in Orlando. Growth continues in the US market.

Esautomotion will be present with an official booth at the 2024 edition of Fabtech, the most important trade show for metal forming, fabrication, welding and finishing in North America, which will be held at the Orange County Convention Center, from […]

12 September 2024

Esautomotion China at CIIF Shanghai 2024. New launches to consolidate growth.

Esautomotion sarà presente con un suo stand all’edizione 2024 del CIIF (Cina International Industry Fair), che si terrà a Shangai dal 24 al 28 Settembre 2024 a Shanghai.

9 September 2024

Esautomotion at Marmomac 2024.

Esautomotion will participate in the 2024 edition of Marmomac, which will be held from 24 to 27 September at VeronaFiere. Marmomac is the most important trade fair event worldwide for companies engaged in the lithic production chain, from the quarry […]

11 June 2024

Esautomotion launches the Esa 4to5 suite and places itself at the forefront of solutions for Industry 5.0.

The term “Industry 5.0” found its official status with the publication of the European Commission’s policy briefing in January 2021. It defined the foundations of the growth of industry in Europe, with a vision that goes beyond efficiency and productivity […]

10 May 2024

The Finance & HR function in Esautomotion. Orderly management and planning for profitable growth.

In increasingly complex and unstable industrial and economic scenarios such as the current ones, Esautomotion’s Finance & HR function has the task of predicting, evaluating and managing any threats to the company’s financial solidity, mitigating their impact to guarantee stability and resilience in the long term and profitably drive the business towards new economic paradigms.

24 April 2024

Esautomotion’s 2023 financial statements approved: revenues still growing despite the uncertain scenario.

On April 4th the Board of Directors of Esautomotion approved the corporate financial statements as of 31 December 2023. At the end of the year, turnover grew by 4.6% reaching €36.7 million, a result to which the incorporation of Sangalli Servomotori, which took place in July 2023, also contributed.

20 March 2024

Plan, coordinate, control. The Production Planning function in Esautomotion.

The semiconductor crisis (or Chip Shortage), which characterized the two-years’ period 2021-22 with consequences also in 2023, determined many companies, including Esautomotion, to face for the first time the unforeseeable possibility of not being able to deliver the orders acquired. […]

14 March 2024

Esautomotion strengthens its presence in press bending: ViS-800W CNCs are now compatible with the main angle gauges.

Esautomotion has announced the full compatibility of the ViS-800W series CNCs with the main angle gauge models. To achieve this result, the software of these CNCs has been completely rewritten by Esautomotion and can now manage the best sensors and […]

31 January 2024

After the great growth of 2022, Esautomotion increasing trend is confirmed also in 2023.

At Esautomotion it’s time for an early in-depth analysis of the final sales data for 2023. From them, a very positive year is coming out, in the wake of a 2022 which had already recorded outstanding numbers. “We are really […]

27 November 2023

Esautomotion at Bumatech 2023: it is the prelude to the official departure of the Turkish branch

Esautomotion will participate in the 2023 edition of the Bursa Machine Technologies Fairs (BUMATECH), the reference trade fair for the sheet metal processing sector in Turkey, which will be held in Bursa from 29 November to 2 December 2023. The […]

20 October 2023

Esautomotion and Sangalli together at the Nuremberg SPS.

Esautomotion will be at SPS (Smart Production Solutions) in Nuremberg, the most important fair in the world for the industrial automation sector, with a joint stand with Sangalli, a recently acquired leading company in the production of electric motors. The […]

12 October 2023

Anticipate the future. The R&D team at Esautomotion.

In an increasingly competitive scenario in which numerical controls must control hyper-sophisticated and fast machines, continuous technological research is a central element in Esautomotion’s growth strategy. To face this challenge, Esautomotion’s R&D function, structured into two departments, Software and Hardware, […]

15 September 2023

ESAUTOMOTION CHINA AT THE CIIF IN SHANGAI TO CONFIRM THE STRONG GROWTH

Esautomotion China will participate in the CIIF (China International Industry Fair) which will be held in Shanghai from 19 to 23 September at the NECC National Exhibition and Convention Center. Founded in 1999, CIIF is held annually in two locations, […]

15 September 2023

ESAUTOMOTION DEBUTS AT MARMOMAC 2023

Esautomotion will be with its own stand for the first time at the 2023 edition of Marmomac, which will be held from 26 to 29 September at VeronaFiere.   With its 12 pavilions, Marmomac is the most important fair in […]

28 July 2023

Esautomotion consolidates its presence in the American market with the opening of a direct branch.

Esautomotion strengthens itself in the USA to better exploit the great opportunities offered by this market. Esautomotion USA has just been established, a 100% Esautomotion capital company, based in Baltimore. “Marcelo is a professional with proven skills and experience, with […]

27 July 2023

The Sales Backoffice office. Where Esautomotion customer satisfaction comes from.

In all companies, the back office service makes it possible to better manage internal and external processes and improve the perceived quality of the service and, therefore, the relationship with the end customer. This is a minor function in name […]

1 June 2023

Esautomotion Turchia debutta a Win Eurasia 2023, un’opportunità fondamentale per crescere nel mercato locale.

Esautomotion Turchia avrà un suo stand ufficiale alla 29ma edizione di Win Eurasia, la più grande fiera internazionale del settore manifatturiero  nella regione turca, che si terrà all’Istanbul Expo Center tra il 7 e il 10 giugno 2023. Con un […]

23 May 2023

Esautomotion and the University of Modena together for the development of automation systems of the future.

The start of the collaboration between Esautomation and the HiPeRT Lab (High-Perfomance Real-Time Systems Laboratory), a spin-off of the University of Modena, has been made official. Founded in 2012 at the University of Modena and directed by Prof. Marko Bertogna, [...]

11 May 2023

Esautomotion integrates its supply chain with the acquisition of Sangalli, a leading company in the production of electric motors.

Esautomotion has officially announced the acquisition of Sangalli srl, a historical company in the production, sale, import/export of electric motors. Active in the market since 1957, Sangalli today has two production units for approx. 3,000 square meters in total and […]

11 May 2023

Esautomotion sets aside another record year. Approved the 2022 Budget.

The shareholders’ meeting of Esautomotion officially approved the company financial statements as at 31/12/2022, which closed with a turnover of 34.091 million/€, equal to an increase of 19.2% compared to the previous year, and a net profit of 5.102 million/€. […]

26 April 2023

Esautomotion at Lamiera 2023. The great trade fairs of 2023 begin.

Esautomotion will be with its official stand at Lamiera 2023 (Pad. 15 – Stand F12), the international event dedicated to the machine tool industry for sheet metal forming and cutting which will be held at Fieramilano Rho from 10 to […]

6 April 2023

Esautomotion looks to the future: changes at the top of the company.

Esautomotion has completed the review of its organizational chart with the appointment of Andrea Senzolo as General Manager.   Starting from the beginning of 2023, Andrea Senzolo is officially General Manager of Esautomotion, reporting to the CEO Gianni Senzolo. Andrea […]

22 March 2023

Esautomotion strengthens the Technical Management and Operations with the entry of two new managers.

After the uninterrupted growth of the last few years, it is time for changes in the organization chart of Esautomotion, in order to adapt it to the size reached.   As part of a strengthening of the managerial production structure, […]

14 February 2023

Esautomotion’s results for 2022 beyond the most optimistic forecasts.

In Esautomotion it is time for final balances and first balance sheets for the year that has just ended.   “It is not possible for me to communicate official data and numbers but I can anticipate that the increase in […]

11 January 2023

Esautomotion at Bumatech in Bursa. A season of great trade fair events is coming to an end.

Esautomotion did not want to miss the appointment of Bumatech (Bursa Machine Technologies Fairs), the most important fair in the Middle East for the machining industry, held from 14 to 17 December in the Turkish city of Bursa.   The […]

7 December 2022

Esautomotion at FABTECH 2022 in Atlanta: a presence that looks to the future.

Back from the successes of Euroblech 2022 in Hanover, Esautomotion sales team moved to the USA to be present at FABTECH, the reference exhibition for the North American sheet metal working industry.   A characteristic of FABTECH is that it […]

29 November 2022

Esautomotion at Euroblech 2022. Positive results and even better prospects.

Esautomotion sales team and technicians returned satisfied from the 26th edition of Euroblech, the international exhibition of sheet metal working technologies, held in Hannover at the end of October 2022.   “It was nice to come back to Euroblech after […]

11 October 2022

Esautomotion at Euroblech 2022.

Esautomotion will have its official stand at Euroblech 2022, the fair to be held from 25 to 28 October in Hanover. EuroBLECH is one of the leading trade fair events for the sheet metal working industry worldwide, with an audience […]

10 October 2022

New cutting head Esa. Efficiency in power.

Esautomotion has officially launched its new bi-rotary head.This is a new generation device, designed for installation on the latest plasma and laser cutting machines, which have exceptionally high levels of automation and productivity. “This head was created to be mounted […]

4 August 2022

Accuracy and flexibility. The activity of the Press Brakes & Metalforming working group.

CNCs for bending represent, alongside those for sheet metal cutting, the core business of Esautomotion and an area in which the company has developed, over the years, an exceptional technological and experiential know-how. Behind this success is the commitment of […]

9 May 2022

Esautomotion at Lamiera 2022 with important new products.

Esautomotion will be present with its own stand at the appointment of Lamiera 2022, the event dedicated to the sector of machine tools for sheet metal working, which returns to Fieramilano Rho after the cancellation of the 2020 and 2021 […]

27 April 2022

2021: Esautomotion sales fly high above market uncertainties.

Esautomotion has made official the figures for the closing of the financial statements as at 31 December 2021. These are exceptional numbers, with an increase in turnover that exceeds 50%.  “We are obviously enthusiastic about the numbers for 2021, which […]

11 April 2022

Esautomotion expands its international presence: Esautomotion Turkey is born.

After the exceptional sales results achieved in 2021, Esautomotion accelerates its internationalization with the opening of a direct branch in Turkey: Esautomotion Turkey. The new company, with majority capital Esautomotion, will have its main office in Bursa and a secondary […]

28 September 2021

Three is always the perfect number. Esautomotion announces the launch of three new products.

Esautomotion, an international leader in the marketing of CNC systems, devices and advanced software for the automation of cutting machines and press brakes, officially presents three innovations designed to bring the level of efficiency and CNC / machine / plant [...]

3 September 2021

Esautomation: the stars and stripes CNC

Esautomation Inc is a US company owned by Esautomotion, based in Houston, Texas. Founded in 2019, it exclusively distributes Esautomotion CNCs in the USA, Canada and Mexico and also provides technical assistance to both direct customers and those who use […]

15 July 2021

Ready & Fast-to-go. The activity of the Esautomotion Cutting Applications team

Esautomotion is a modernly organized company to deal reactively and efficiently with an extremely dynamic market such as that of CNC.   CNC for cutting: the DNA of Esautomotion. Cutting is the product area on which Esautomotion has built its […]

15 April 2021

Esautomotion approves the 2020 consolidated financial statements

On March 30, 2021, the Esautomotion board met to approve the company’s official financial statements for 2020. In a year complicated by the global crisis triggered by Covid-19, Esautomotion’s performance was positive: revenues showed substantial stability, thanks to the growth […]

18 March 2021

Esautomotion announces the distribution of PCSS-ESA, advanced safety plc for press benders

Esautomotion will shortly start marketing the new PCSS-ESA safety PLC controller for press brakes, co-developed on Esautomotion specifications by Lazer Safe, an Australian company world leader in the sector.   Designed for the safety of those who work press-bending machines [...]

25 February 2021

Who is Who in Esautomotion Francesca Villoresi, Vice R&D Manager

From January 2021, Eng. Francesca Villoresi is the new Vice R&D Manager of Esautomotion. Francesca is responsible for coordinating and expanding all of Esautomotion’s pure and applied research activities, both as the development and launch of new products, software and […]

11 February 2021

Esautomotion Closes 2020 on the growth. Very positive outlook for 2021.

The end of a year is always a time to take stock and assess the results achieved and to define objectives and priorities for the new year. Esautomotion’s top management wanted to comment on the company’s performance in 2020, anticipating […]

15 December 2020

Esautomotion presents the new commercial structure: improved service to customers, deeper presence in the markets to grow further.

Esautomotion has recently revised the layout of its commercial structure with the aim of further raising the level of customer service and optimally supporting the constant growth of the company on a global scale. Depending on the geographical area, the [...]

3 November 2020

Esautomotion introduces the new website.

The new Esautomotion website has been online for a few days and can be visited at www.esautomotion.com. Developed in collaboration with the Ego NewCom agency, the site has been revised in all its parts compared to the previous version. The […]

13 October 2020

Esautomotion in China: the future in action

These have been busy months for the Esautomotion branch in Shanghai. The Chinese economy is recovering strongly after the lockdown at the beginning of the year: competence, enthusiasm and determination are the weapons with which Paolo Borelli, director, and his […]

9 September 2020

Esautomotion at CIIF 2020 in Shangai: a leading presence with the preview of the new VIS-800 Series

Esautomotion will be present with its own stand at the 2020 edition of the CIIF (China International Industry Fair), which will be held at the National Exhibition and Convention Center in Shanghai from 15 to 19 September. Founded in 1999 […]