Designed for use with VIS-600 and 800 CNCs,
Esautomotion expansion boards take your control system
to the highest possible levels of efficiency and power.
The CNC tailored for you,
without unnecessary waste or costs at your expense
In your interest, the construction philosophy of Esautomotion
provides not to install standard hardware that could remain
unused if mounted in an undifferentiated way.
With the addition of our expansion boards,
you can finalize the right CNC system for you,
optimizing its scalability and achieving excellence
in terms of performance.
Thanks to the know-how acquired over the years,
Esautomotion offers a complete line with dozens
of optional boards capable of satisfying not only
the transversal needs of all applications but also
the most specific for each operational and technological area.
The boards use the optical fiber (I / O link)
or the Ethercat protocol as main connection bus.
General purpose boards with fiber optic I / O Link connection
(connectable to all VIS-600 and 800 CNCs, for all applications)
Plasma cutting application boards with fiber optic I / O Link connection
(connectable to all VIS-600 and 800 CNCs)
General purpose boards with Ethercat connection
(connectable to all VIS-600 and 800 CNCs, for all applications)
Rack Mounted boardsfor all applications
(only connectable to CNC Rack S500)
Rack Mounted boards for laser cutting application
(connectable only to CNC Rack S500)
The following boards
must be combined with the BRD.019.025 node:
The card consists of:
BRD.021.461: board for adding 4 analog axes to the system.
BRD.007.461: board for adding 32 + 32 digital inputs and outputs to the system
The inputs and outputs are located on 4 removable terminal blocks 3.5 mm pitch.
Input features: Optoisolated – working range 20 ÷ 28Vdc – HW10ms filter. Features
Output: 0,7A max – working range 20 ÷ 28Vdc thermally protected against overload and short circuit.
BRD.019.473: board for the management
of laser cutting generators is used for adjusting the cutting power.
The card interfaces with the laser generator through the following outputs: